2-in-1 material correction and leveling machine for thin plates
equipment characteristics
The material frame and the sheet levelling unit are combined together,which is suitable for the levelling of metal sheets with materialthickness between 0.3~3.2mm.
The leveling roller adopts the structure of 5 up and 4 down,and the four-point fine-tuning can effectively eliminate the stress of the plate and fully achieve the leveling effect.
The integrated electric box allows users to control the rack and the levelling machine.
Roller adjustment adopts a special marking adjustment method to replace the traditional dial indicatoradjustmentaromas, withoutadditional correction,debugging more convenient and accurate.
We can customize the number of leveling roller groups, fully driven leveling rollers, and loading carts according to material and production requirements.
It can also be used for production lines that require cutting of large-sized materials.
Equipment specifications
Equipment specifications
Equipment pictures
2-in-1 material correction and leveling machine, liftable2-in-1 material correction and leveling machine, liftable
equipment characteristics
Optimized combination of material rack and precision leveling machine, materials include stainless steel,copper and aluminum plates within thickness range of 0.3-1.5mm,where the surface finishing and precision are highly required after leveling.
Upper roller set can be lifted up into 45 degrees for cleaning and maintenance,to avoid any scratch to plates.
The upper 4/lower 5independent rolling structure and calibration design are implemented,the bending direction of plate can be freely adjusted by the auxiliary roller in upperset.
Unique marking adiustment method,replacing the traditional dial indicator.No additional calibration needed,simpler,more accurate andlonger lifespan.
The machine is controlled by dual variable frequency drive,which can reduce the scrap rate of scratching due to actvation.
Extra-length material cutting productionline is also feasible.
Equipment specifications
Equipment specifications
Equipment pictures
2-in-1 material correction and leveling machine for medium thick plates
equipment characteristics
The material frame and the leveling unit are combined together,which is suitable 0.3-4.5mm.
The levelling roller adopts the structure of 5up and 4 down,and the turbine fine adiustment can effectively eliminate the stress of the plate and fully achieve the levelling effect.The folding arm can make the material easily enter the levelling machine for correction.
The integrated electrc box allows users to control the rack and the levelling machine.
Roller adjustment adopts a special marking adjustment method to replace the traditionaldialindicatoradiustmentaromaswithoutaddtional correction,debugging more convenient and accurate.
The number of levelling rolls,the fulldrive of levelling rolls and the loading trolley can be customized according to the material and productionrequirements.
It can also be used for production lines that need to cut long size materials.
Equipment specifications
Equipment specifications
Equipment pictures
2-in-1 material correction and leveling machine for thick plates
equipment characteristics
The material frame and the leveling unit are combined together,which is suitable for the leveling of thick plate materials with material thickness between 0.8 and 10.0mm.
The levelling roller adopts the structure of 3 up and 4 down,and the turbine fine adjustment can effectively eliminate the stress of the plate and fully achieve the levelling effect.The number of levelling roller groups can also be customized according to the material and production needs,and the double press arm and folding device can be configured to make the material easily enter the levelling machine for correction.
The integrated electric box allows users to control the rack and the levelling machine
LisThe rack is equipped with clutch to prevent material pulling,and the leveling roller is fully driven and the loading trolley.t item
It can also be used for production lines that need to cut long size materials.
Equipment specifications
Equipment specifications
Equipment pictures
2-in-1 material correction and leveling machine logo
equipment characteristics
Fine adjustment device is equipped for products requiring precision processing.
High quality magnetic contactor and other electronic parts are installed for better lifespan and stability.
Combining material rack and corrector for space saving.
Production cost can be reduced by simplified feeding operation.
High wear resistant rollers are made of solid bearing steel,strengthened by heat treatment with hard chrome plated.
